*1 Be sure to use an oil mist trap that is appropriately sized to match the pumping speed of the pump and the volume of the chamber which is being evacuated.
*2 An adapter is required for attachment to PVD series, VD151 and VD201.
*3 Oil recovery cannot be used with TMX-1 and TMX-2 models.
*4 Conversion to a cartridge filter is not possible for TMX-1, TMX-2, and TM-2 (old model) units.
The oil mist trap can collect oil smoke (oil mist) discharged during operation of the oil rotary pump and automatically collect it into the vacuum pump.
Oil rotary pump Oil smoke from the exhaust port is generated especially at around atmospheric pressure. The oil may contaminate the atmosphere due to oil splashes, but this is solved by installing this oil trap.
It is also possible to replace only the element (filter).
|Model||Attachment flange *1||Vacuum pump used||Weight(kg)||Material|
Trap : Mild steel (SPCC)
|TM201||VF40/G 1・1/2||VD301 (for low loads)*5|
VD401 (for low loads)
|TM401||VF40/G 1・1/2||VD301 (for high loads) *6|
VD401 (for high loads)
VD601 (for low loads)
VD901 (for low loads)
(standard, F) *3
VD601 (for high loads)*2
VD901 (for high loads)
|PKS-070 (for high loads)|
VS2401 (for high loads)