ULVAC Vietnam Representative Office

Vacuum Valves vlp series

ULVAC's vacuum valves were developed based on a wealth of technology and experience in the vacuum field. We offer a variety of products that meet a wide range of needs from atmospheric pressure to ultra-high vacuum.

specifications

ModelVLP-SA
Maximum allowable differential pressure on valve plate
(Positive pressure/counter pressure) MPa
0.10
Maximum allowable differential pressure in opening direction (Positive pressure/counter pressure) MPa0.10
Plate sealO-ring
FeedthroughO-ring
ActuationDouble-acting cylinder
External leak rate*1 Pa・m3/s≦1.0E-10
Internal leak rate*1 Pa・m3/s≦1.0E-10
Operating pressure range
(absolute pressure) Pa
Atm. ~ 1.0E-5
Bakeout temperature
(when stopping)*2 ℃
Body:150*3, actuation:70 (Indicator: 60)
Operating ambient temperature ℃5~70
Fluid temperature ℃5~70
Heating & cooling speed ℃/h≦30
Operating ambientNon-corrosive
FluidNon-corrosive
Compressed air to cylinder MPaG0.40 ~ 0.60
Warranted operation cycle*4100,000
OrientationNo limitation
Position indicatorOptional (sell separately)
Material of major parts (Vacuum side)Stainless steel 304
Material of major parts (Atmosphere side)Stainless steel 304, Aluminum-6061 (anodized aluminum)
Bellows material
Seal material (Vacuum side)FKM
Grease (Vacuum side)Fluorine grease
Attachment for liftingNone*5
RoHSComplied

*1 Leak rate does not include permeation in O-ring. External leak during opening and closing is not regulated in the case of O-ring shaft seal feedthrough.
*2 Do not open and close during bakeout.
*3  Regarding to VLP-MB abd VLH-MB, maximum body bakeout temperature in opening position: 200℃ (392F) and in closing position: 150℃ (302F).
*4 See instruction manual for detail.
*5  Lifting attachment is included for VLP-SA350JH (Eyebolt M12 x 2pcs).