I. What is SUN oil water separator??
The SUN oil water separator is a device designed to continuously remove water from oil in an oil vacuum pump system. This ensures the oil is always clean and fresh, reducing oil change times and extending the life of the vacuum pump
II. SUN oil water separator types
 |  |  |  |  | |
| SUN-2SPE, 3SPE | SUN-2SPWE, 3SPWE | SUN-MSP, MSPW | SUN-4SP, 4SPW, 4SPWA | SUN-2000, 3000 | |
| Speed (L/min) | 1.2-1.4 | 1.2-1.4 | 0.6 | 1.2-1.4 | 2.2-3. |
| Filter capacity (L) | 1.5 ~3.0 | 3.0 | 1.0 ~2.0 | 4.0 ~5.5 | 23 ~ 42 |
| Filter | [A] or [C] | [S-1-10-10] + [A] or [C] | [S-1-10-7] + [A] | [S-1-10-10] + [A] or [C] | [S-1-10-20] + [A] *2 or 3 (set) |
III. SUN Oil water separator structures
1. Advantages
– Separates water, iron filings, dirt from vacuum oil… maintains high cleanliness of oil, reduces pump heat.
– Maintains the pressure of the vacuum pump, high economic benefits.
– Vacuum pump life increases.
– Increase productivity and extend vacuum pump maintenance time.
Image: Set up a vacuum oil water separator system for the vacuum heat treatment system at the customer’s factory
2. Structures
3. Connect the SUN oil water separator to the vacuum pump
4. Filter
– The separator filter removes water from oil using the water absorption function of the designed ion exchange fiber. A water film is formed inside the filter element to retain water in the oil it passes through. The water is then homogenized and separated through the difference in specific gravity of water and oil.
5. Filter types
| Type | ||||
| [A] type | [C] type | [F] type | [CW] type | |
| Filter | 1 layer | 2 layers | ||
| Separating type | Water | |||
| Water separation ability | 200ppm | |||
| Material | SUS304 | |||
| Dimension (mm) | D70×H250 | D70×H188 | D70×H500 | |
6. Compare oil separator filter with conventional filter
| SUN filter | Conventional filter | |
| Filter structures |  |  |
| Principle of water separation | Homogenization, saturation and water separation by water membrane. | Push water from the middle of the filter core to the outside through the mesh. |
| Filter size | 200 – 300μm | 3 – 5μm |
| Separating type | Completely remove all water particles | The mesh size limits the removal rate of water molecules |
| Application | Vacuum oil | Gasoline and kerosene |
IV. Compare oil quality when using SUN oil water separator
 |  | |
| SUN Oil Water Separator | Not use | Use |
| Time of use | 7 days | 3 months |
| Oil | MR-200 | |
| Experiment with | Vacuum furnace | |
| Analysis of Pollution Level (mg/10ml) | 14.8 | 0 |
| Total acid value (KOH/10mg) | 0.2 | 0.1 |
| Water content (ppm) | 15,000 | 170 |
V. New product SUN Aqua cleaner
Separates oil from cleaning liquid
